Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement – screwdriving – turning – replacement – screwdriving – turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved.
6003 Joker Combination wrench, Imperial
- Especially suitable for tight spaces
- The special open end geometry expands the placement possibilities of the tool
- The low return angle in the open end "takes" the screw every 15°
- Slim ring side with 15° crank
- With Take it easy tool finder: colour coding by size
Product features
For very tight spaces
The Joker 6003 ring spanner with its special open end geometry – open end offset by 7.5° and the double hexagon profile – doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn.
Joker 6003: For return angles of less than 30°
Double-hex geometry
The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping.
Joker 6003: Tilted ring side
The ring side is tilted at 15° to the tool axis to prevent injury.
Take it easy tool finder
Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets).
Product details
Facts and figures
Part number
05020220001
05020211001
05020212001
05020213001
05020214001
05020215001
05020216001
05020217001
05020218001
Colour
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
105
115
125
135
160
167
182
210
230.0
16
19
22
24.5
26
29
35
40
42
4
4.5
5
5
6
6
6.5
7.5
7.5
10
12.5
15
17
19
20
23
26
27.5
6
7
7
8
8.5
8.5
10
11.5
11.5
Add to watch list
Find out more about this product
Product description
As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size.
